Skip to content

Tabletop noble fir tree in a foam frame

Finished decorative tree with red baubles
Finished decorative tree with red baubles.

Make a compact tree with a recessed centre filled with small festive decorations. Florists can use short evergreen offcuts and ornaments that are difficult to place in larger work.

What makes this project distinctive

Short noble fir sprigs are pinned densely over the base, leaving the central recess open.

Programme

Stages shown in the recording

  1. 00:04Concept and materialsGather thick polystyrene, a pot, noble fir offcuts and small decorations.
  2. 01:36Triangular baseSize the base to the pot diameter and cut it with a knife.
  3. 03:57Narrow frameCut a raised border for the decorations from a second layer.
  4. 06:02Assembling the baseGlue on the frame and cover it with masking tape.
  5. 07:32Wire pinsCut and bend thin green wire into pins.
  6. 08:26Preparing the foliageCut noble fir offcuts into short sprigs.
  7. 08:52Covering the framePin sprigs closely over the surface, leaving the inner compartment open.
  8. 10:29Large decorationsGlue apples and cones in place first.
  9. 11:50Cinnamon and small groupsGroup spices, berries and star anise.
  10. 13:29Attaching the potWeight the pot if needed and connect it to the tree.
  11. 14:06Twine linesRun knotted lengths of twine from the top down to the pot.

Preparation

Materials and tools

  • Polystyrene triangle and raised border
  • tape
  • noble fir
  • fine wire pins
  • small apples
  • pinecones
  • berries
  • star anise
  • cinnamon
  • ceramic pot
  • twine
  • adhesive

What you will make

    What the recording covers

    The base combines a thick polystyrene triangle with a thin triangular frame. See how to cut and join the pieces, smooth them with paper tape and prepare plenty of wire pins.

    Apples, baubles, small cones, cinnamon and star anise are grouped inside, working from larger to smaller details. The tree is glued to a terracotta pot, weighted if necessary, and finished with descending lines of twine.

    Who it is for

    • Florists can use short evergreen offcuts and ornaments that are difficult to place in larger work.

    The recording follows one tabletop tree in a pot.