Skip to content

Large branch Christmas tree on a wire frame

Finished tall branch tree with red baubles
Finished tall branch tree with red baubles.

Build a tall decorative tree from branches and finish it with red baubles.

What makes this project distinctive

The lower frame widens to spread the branches, while the top remains narrow.

Programme

Stages shown in the recording

  1. 00:00Base and central rodPrepare a wooden block, a drill and a metal rod.
  2. 00:44Wire ribsFasten wires around the rod at close intervals.
  3. 01:55Rigid meshInterweave adjacent wires to strengthen the frame.
  4. 02:54Widening the baseAdd wire to extend the lower tier.
  5. 03:50Fitting the branchesTry larch branches against the frame and add wire where needed.
  6. 04:44Assembling the treeSecure the branches at several points, keeping the base wide and the top narrow.
  7. 06:19Trimming the shapeUse secateurs to refine the outline and height of the top.
  8. 06:57IlexPlace ilex branches inside the wire mesh and secure them.
  9. 07:36Red baublesHang baubles at different heights using bullion wire.
  10. 08:33Snow effectApply spray adhesive and decorative snow to the finished tree.

Preparation

Materials and tools

  • Wood slice
  • central metal rod
  • stiff and binding wire
  • larch branches
  • ilex
  • red baubles
  • decorative snow
  • cutting tools

What you will make

    What the recording covers

    The florist anchors a rod in a wooden base and weaves a wire network around it.

    Larch branches are wired to the frame at several points and trimmed to shape. Holly and baubles suspended at different heights are added before artificial snow. The demonstrated tree is about 1.7 m tall.

    Who it is for

    • This lesson suits anyone making a large interior piece and learning to support branches with wire.

    The demonstrated tree is about 1.7 m tall.